Dell Switch IP 설정
**MGMT 대역대와 Ethernet 대역대를 다르게 설정해야함.
1. MGMT IP 설정하기 (MGMT Port 연결)
(config)# interface mgmt 1/1/1
(conf-if-ma-1/1/1)# no ip address dhcp
(conf-if-ma-1/1/1)# ip address 10.0.1.70/24
-----------------------------------------------------------------------
(conf-if-ma-1/1/1)# Dell EMC (OS10) %IP_ADDRESS_ADD: IP Address add is successful.
IP 10.0.1.70/24 in VRF:default added successfully
-----------------------------------------------------------------------
2. ethernet 에서 IP 설정하기
(config)# interface ethernet 1/1/1
(conf-if-eth1/1/1)# no switchport // L3 모드로 전환
(conf-if-eth1/1/1)# ip address 192.168.1.100/24
(conf-if-eth1/1/1)# show configuration
---------------------------------------------------------------
interface ethernet1/1/7
no shutdown
no switchport
ip address 192.168.1.100/24
flowcontrol receive on
----------------------------------------------------------------
3. ethernet 에 IP / VLAN 동시 설정하기 (access 모드만 가능)
(config)# interface vlan 100
(conf-if-vl-100)# no shutdown
(conf-if-vl-100)# ip address 192.168.1.100/24
(conf-if-vl-100)# show configuration
(config)# interface ethernet 1/1/5
(conf-if-eth1/1/5)# switchport mode access
(conf-if-eth1/1/5)# switchport access vlan 100
(conf-if-eth1/1/5)# show configuration
----------------------------------------------------------------
interface ethernet1/1/5
no shutdown
switchport access vlan 100
flowcontrol receive on
----------------------------------------------------------------
# write memory // 현재 설정 저장하기
# show running-configuration
# show interface status // Uplink 여부 확인